Driver Ball Position
PurePoint Golf Instruction – Driver Ball Position – Driver Golf Swing
I often see a number of amateurs prepare for their driver golf swing by walking up, after they have teed the ball up, they just take a step back and they address it. They grip the golf club and they address it, and they sort of just plot their feet down wherever they land, but let me tell you the proper way.
This way you’ll be able to get the ball in the correct position more often than not. After you have the golf ball and you’ve gripped it and you have addressed it, then you’ll just look down, take a peek down, and if this golf ball is running towards the left heel, then this is correct.
If you look down and you see the golf ball is a little too far forward off your left, that’s too far forward and you’ll probably see that the shoulders are aimed too far to the left.
On the other hand, if you look back down and you think the ball is too far back in your stance when you put this shaft along you, you’ll be aiming way off to the right.
So, after you’ve addressed the golf ball, all you have to do to get ready for your driver golf swing is bring the shaft up and lay it along your shoulder line, and it should be going in the direction you want to go with it.
If you get it too far back in your stance at address, you’ll wind up aiming your shoulders too far off to the right.
And if you get it off the left heel, this should be proper for most people.
Give that a try the next time out.
Bobby Eldridge is the Head Instructor for the PurePoint Golf Academy where he teaches “The Simple Golf Swing” theory. You can check out PurePoint Golf instructional DVDs at http://www.golfswingguru.com/index15.htmBobby Eldridge is the Head Instructor for the PurePoint Golf Academy where he teaches “The Simple Golf Swing” theory. You can check out PurePoint Golf instructional DVDs athttp://www.golfswingguru.com/index15.htm
Article Source: http://www.simplysearch4it.com/article/52161.html
CF-360LX, Loose Radial Component Lead Cutter with tube oulet
|
|
Washing Machine Lid Switch for Whirlpool Sears 3949247 $3.95 WASHING MACHINE LID SWITCH… |
|
|
Zen Toolworks CNC Carving Machine DIY Kit 7×7 $359.99 NOT INCLUDED – This is just the CNC machine with motors. You will need a 3 Axis Stepper Motor Driver to manage each motor, a spindle/cutter (a Dremel would work) and a DC power supply for the driver. You will also need a computer with a standard printer port and CNC software. – You will also need a way to mount and secure the spindle/cutter tightly to the Z-axis plate on the machine. We offer a Sp… |
|
|
75 to 300 Ohm UHF/VHF Matching Transformer $0.47 Adapts 75 ohm coax to 300 ohm twin lead (or vice-versa) at antenna or television. 5-900 MHz UHF/VHF/FM…. |
